90 Degree Shower Enclosure

Consists of two or more fixed panels and one door. Door may be hinged to the wall or hinged directly head rail and floor. A metal header is used at the top of the enclosure for additional strength and support.

Head Rail Support

Head rails are used to add structural integrity to an enclosure. The add more support for enclosures that use uncommon installation methods and also allow the door to pivot from either direction. 

Hinged Doors

A Door can be hinged off a wall and the inline panel can connect to the returning panel with clamp hardware.

Plastic Seals

Glass Shower Enclosures can be made water tight with clear plastic seals. These seals clamp on the edge of the glass and are removable. The Seals have different types of fins for different features. 


Rigid-H will allow the door to close and stop inline with the panel.

Soft Fin-H will allow the door to swing in and out both ways.

Single Fin can create a strong seal and also reach father then H-Seals.

Silicone Adhesive

We use a high quality silicone sealant that cant be found in big box stores. Our Silicone uses Special Additives to Resist Mold and Mildew


Hardware

Metal Finishes in all types, Common finishes include Chrome, Brushed Nickel and Oil Rubbed Bronze